Explore your RO/DI system
Rotate the system and select a component to see the matching service, repair, and replacement options.
Loading 3D model…
Interactive 3D isn’t available in this browser. Service details for every component are listed below.
Service & repair information
Upper Filter Housing Upper cartridge housing service / replacementStarting at — inspection required
Starting at — inspection required
Upper bowl and head — typically the prefilter stage. Cracked bowls, worn O-rings, and leaking heads are replaced; cartridge contents should be confirmed on inspection.
Lower Filter Housing Lower cartridge housing service / replacementStarting at — inspection required
Starting at — inspection required
Lower bowl and head — typically the DI or polishing stage. Housing, head, and media service. Media type and capacity should be confirmed on inspection.
RO Membrane Housing Membrane housing and membrane serviceRange — depends on membrane size and condition
Range — depends on membrane size and condition
Stainless RO shell, end caps, and retaining clamps. Rising TDS or falling output usually points here. Membrane specification should be confirmed on inspection.
Pressure-Relief Button Relief button inspection / replacementStarting at
Starting at
Red pressure-relief control on the lower housing head. Stuck, leaking, or missing buttons are replaced.
Fittings & Ports Fitting / leak repairStarting at
Starting at
Elbows, collets, stems, and open ports on the RO shell and filter heads. Drips and weeping fittings are re-seated or replaced. Thread standards should be confirmed on site.
Cart Frame & Handle Frame and handle repairInspection required
Inspection required
Cart upright, handle, and stabiliser. Bent tubing, loose hardware, and worn grips are repaired or replaced.
Wheels Wheel inspection / replacementStarting at
Starting at
Tyres, rims, hubs, and spokes. Flat spots, cracked rims, and seized hubs are replaced.
Axle & Retainers Axle and retainer serviceInspection required
Inspection required
Transverse axle, hub washers, and retaining pins. Bent axles and missing retainers are replaced.
Mounting Hardware Mounting band and plate repairStarting at
Starting at
RO mounting bands, attachment blocks, and filter plates that hold the housings to the cart.
Tube Ties Tube tie replacementStarting at
Starting at
Ties that secure tubing to the cart. Broken or missing ties are replaced. Tubing itself is not modelled and is inspected on site.