Winsol Aluma Wash

Note: For the aluminum inhibitors to function properly, Aluma Wash must be diluted at least 1:4. Do not use straight.

Aluma Wash may be diluted with water from 1:32 to 1:16 as the usual range.  A good starting dilution is 1:32 in hot or cold water. Apply solution directly to floors with a damp string mop or sponge mop. For external building surfaces, dilute about 1:8 and apply with a white pad, scrub in and rinse.  Squeegee dry where necessary, especially windows affected by overspray during cleaning.

To avoid electrical shock or air flow contamination, avoid allowing moisture to penetrate between joints or down air vents. Scrub area briskly until all traces of soils and marks have vanished. Rinse carefully and repeat only if necessary.  

For hand cleaning:  Mix about 1 ounce to 32 ounces of water in a  spray or pour top bottle.  Apply solution to cleaning cloth and scrub lightly or until soil is gone. Solution may be sprayed directly on seamless surfaces if there is no risk of getting moisture into electrical conduits or air conditioning vents below the surface.