Pure Water Power - PWP Little Beast Single RO 115V
Pure Water Power - PWP Little Beast Single RO 115V
Pure Water Power - PWP Little Beast Single RO 115V

Pure Water Power - PWP Little Beast Single RO 115V

Regular price$3,554.10
Shipping calculated at checkout.

  • Drop-shipped directly to you!

The "Little Beast" Single RO 115 volt Electric system is revolutionizing the Industry.  This powerful work horse is compact and produces up to 2.3 gallons per minute  and can operate up to (3) waterfed poles.  The "Little Beast" is constructed with a powder coated steel frame and consists of  sediment & carbon filters, Single 40-inch (RO) membrane and a large 20-Inch (DI) Filter.  Powered by a 1/2 hp, NIDEC pump motor with a vane pump with an  unloader and bypass hose,  manual flow control valve. High quality custom made  control box that can be operated at the unit or with a remote control up to 500 feet away.  Equipped with a dual inline TDS meter to measure input and output readings.

The "Little Beast" was designed to be powerful, rugged, compact, and versatile giving you the option to truck mount or be portable in the field. This unit can be used tap pressure only or used with 115V 1/2 hp motor and vane pump. Must use a pressurized water source to operate system.  Cannot be used to pull from a buffer tank.   With the control box you can operate the "Little Beast" at distances up to 500 ft. giving you the ability to control your water flow from the pole at all times.
The "Little Beast"  units are sold as skid mounts and give you the capability to add 150 ft. and/or 250 ft. hose reels that can be mounted in 4 different locations on the unit.  These hose reels can be directly plumbed within the system and can be configured to  incoming or outgoing water supply.    Wheel kits are available to make this unit portable. 
With a foot print of only 15" x 15"  and 50" tall this unit can be mounted just about anywhere on your vehicle or trailer.  You can even mount it under flat bed trucks.  Can be mounted upright or longways. Equipped with a GFCI Cord for connection to 110 outlet. or generator.
Pure Water Output
Tap Pressure Only (Pump Off)         (@ 60 psi:  .9 gpm)      (@ 50 psi:  .75 gpm)
With Pump On plus tap pressure      2.3 gpm
This System produces 126 gallons per hour and is capable of operating (2) Water fed poles with a 4 jet brush and rinse bars. This is maximum capabilities of this unit with an incoming water pressure of 50 psi and booster pump on.   
System Includes:
* 4-Stage Purification
* Powder coated frame
* (1) 40" Stainless (RO) housings and Ultra High Flow RF5 (RO) Membrane
* 10" x 2.5" Sediment housing and filter
* 10" x 2.5" Carbon housing and filter
* 20" x 4.5" (DI) housing and filter
* Long Range Control Box with Manual and Remote Operation
* 1/2 hp Nidec 115 V Motor w/Vane Pump and Manual Flow Control Unloader
* Inline Dual In/Out TDS Meter
* 50 ft. 3/8" commercial grade hose w/GH connections
* Filter housing wrenches x 2
* All filters included
* QC hoses for easy (RO) output test
* 10 ft. Cord w/GFCI Plug Assembly

* 110 lbs.
* 50" Tall x 15" Wide x 15" Deep
* Can be stored, transported and used flat or upright.
* Steel Swivel Compression fittings on all rubber hoses within system.
* All brass fittings used , no cheesy plastic parts.  Commercial quality
* Produces up to 2.3 gpm

We coordiante with the manufacture and ship to your preferred location.

If a product is on back-order more than 7 days, we will notify you immediately and issue a full refund.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Recently viewed